+- Redditch Tabletop Gamers Forum (https://forum.redditchtabletopgamers.com)
+-- Forum: The Hobby (https://forum.redditchtabletopgamers.com/forumdisplay.php?fid=5)
+--- Forum: Painting and Modelling Gallery (https://forum.redditchtabletopgamers.com/forumdisplay.php?fid=24)
+--- Thread: Quickshade gone wrong! (/showthread.php?tid=2778)
Quickshade gone wrong! - Agincourt - 07-03-2016
My quickshade has started to form a skin and has gone into a thick goo beneath. Any ideas? Is this saveable? It's not really working as it is...
Only used 1/4 tin...
RE: Quickshade gone wrong! - Stuart - 07-03-2016
Giving it a *really* good stir would be my first suggestion, but I suspect you've already tried that? It will separate as it's oil based, but I would hope it's salvageable.
RE: Quickshade gone wrong! - Agincourt - 07-03-2016
(07-03-2016, 11:08 AM)Stuart Wrote: Giving it a *really* good stir would be my first suggestion, but I suspect you've already tried that? It will separate as it's oil based, but I would hope it's salvageable.
I do give a thorough stir every time, I use the stuff on the rod to paint with, the weird thing is it has gone so very thick and hasn't separated between uses. I have emailed The Army painter boys in Denmark...
RE: Quickshade gone wrong! - Agincourt - 07-03-2016
(07-03-2016, 11:29 AM)Agincourt Wrote:(07-03-2016, 11:08 AM)Stuart Wrote: Giving it a *really* good stir would be my first suggestion, but I suspect you've already tried that? It will separate as it's oil based, but I would hope it's salvageable.
I do give a thorough stir every time, I use the stuff on the rod to paint with, the weird thing is it has gone so very thick and hasn't separated between uses. I have emailed The Army painter boys in Denmark...
Just found some downloads on their site! If it goes thick (overtime) use turps to thin...